» 4 modes for Monopolar Cut
» 4 modes for Monopolar Coagulation
» 2 modes for Manual & Auto-Start Bipolar Coagulation
» One mode for Bipolar Cut
» Bipolar Cut in TUR Mode (Optional)
» 360 watts maximum power output
» Auto-stop mode for optimum tissue coagulation (Preventing tissue carbonization)
» Recommended for all variety of operations; General surgery, Micro surgery, TUR and Laparoscopic surgery
» Intelligent power control
» Automatic self checking
» Recognition of 32 different functional failures and display on LCD
» 10 Programmable memories to save different power settings for different surgeries

User friendly
» Quick and easy to set up
» Simple setting adjustments

Patient Safety
» Type of output: CF (Cardiac Floating)
» Permanent digital control & monitoring contact impedance between patient and neutral electrode
» Dosage Rate Control: Automatic and permanent control of output power (in normal and single fault condition)
» Permanent HF leakage Current Control in Monopolar mode: Acoustic & Visual alarm at 150mA or higher. Also HF current output stops after afore-mentioned alarms

Simultaneous Independent Coagulation
» Permits two surgeons to fulgurate at the same time from a single generator, for added convenience and efficacy

Reliability
» HF Leakage Current: Monopolar < 150mA / Bipolar < 20mA
» LF Leakage Current: Normal condition < 10µA / Single fault condition < 50 µA
» Manufactured to the highest standards of quality in electrosurgical technology: IEC60601-1, IEC60601-1-2 & IEC60601-2-2
» Standard 2-Year Warranty and 5-Year after-sales service

Flexibility
» Compatible with the most common accessories; standard 3-pin hand switching, standard 2-pin hand switching, One-pin foot control pencil with 8mm connector & One-pin foot control pencil with 4mm connector
» Provides the ability to reduce power setting while activating the generator
» Connect Standard Monopolar & Bipolar foot switching devices independently

» Main Voltage: 220 VAC ± 10%, 50 Hz or 110 VAC ± 10%, 50~60 Hz
» Maximum Power Consumption: 800 V.A
» Protection Class: Class I
» Fundamental Frequency: 410 kHz ± 1% / Modulation frequency: 25 kHz
» Weight: 8.8 kg
» Dimensions (WxHxD): 37.1x15.9 x 46.5 cm

	Mode	Max. Power (w)	Rated Load (Ohms)	Max P-P Voltage (V)	Typical Crest Factor
Monopolar Cut	Pure Blend1 Blend2 Blend3	360 330 300 270	350 450 500 500	1300 2800 3100 3800	1.5 2 2.5 2.8
Monopolar Coag.	Swift Forced Soft Spray	200 140 100 120	500 500 150 700	3450 3800 600 6000	3.3 4.5 1.5 5.5~7.5*
Bipolar	Cut Manual Coag. Auto Start Coag.	100 80 50	50 50 50	900 550 550	2.5 1.5 1.5

* According to power adjustment

» Two Channels Monopolar Handle (Disposable)
» Dual Pad - Patient Plate (Disposable)
» Cable for Patient Plate
» Monopolar Electrodes
» Dual Channel Footswitches
» Bipolar Forceps
» Bipolar Cable